Home
Farm Store
Our Story
Contact

Home
Farm Store
Our Story
Contact

Handmade Clothing

Home » Handmade Clothing

Coming soon…

Recent Posts

Très Coffee Table
Bank Bench
English Field Gates
Fire Ebonized Dining Room Table
Custom built-in bookshelves

hoenerfarms

Award winning furniture - design and fabrication. With a focus on traditional craftsmanship - Hudson Valley. [email protected]

Drilling perfectly square holes (or mortises) can

Drilling perfectly square holes (or mortises) can be easily accomplished with a hollow chisel mortiser - but they can be a little tricky to use in hardwoods or for deep mortises. Here are some tricks and workarounds I use.
.
- Make sure your tools are sharp! Both the chisel and the drilling bit in the center need to be sharpened! The chisel is sharpened on all four sides, and inside to hit the points. You can touch up the drill bits with a diamond file (or a regular one 😆).
.
- Keep your chips clear! It’s very easy to overheat and burn up the chisels/bits when they get clogged with wood chips. Always keep compressed air blowing through the bits. If they overheat they will loose sharpness very fast and you will break bits.
.
- Adjust your clearance, Clarance! The bit and chisel need a clearance for proper chip clearing, it doesn’t matter exactly the setting, but it must be deep enough for the size of mortise and material you are using.
.
- On smaller machines it can be helpful to plunge several times, slowly working to full depth. This clears chips and reduces heating.
.
- Plunge the walls of your mortise first and come back for the waste
.
- Always mark your reference faces! Put an easy remember mark on all your pieces, this way the same side of the board is always referencing the fence. That will ensure you get the same mortise distances on all pieces.
.
.
-IMPORTANT NOTE:
Personally I can’t stand this “more in the caption” trend of Insta - it shows that all these platforms are becoming fully enshitified. There is a great article about the enshittification of social media applications, and its ramifications on culture search it out for further reading ✌️🤘.
I think maybe we will go back to just sharing curated images, who is into that?
.
#wood #woodwork #woodworker #woodworking #mortiseandtenon #joinery #bois #tips #woodworkingtips #diy #howto #holz #furnituremaker

The only way to finish a piece - almost ready for

The only way to finish a piece - almost ready for install 🤘.
.
.
.
.
#wood #timberframe #woodworker #woodwork #bois #holz #handtools #kanna #japanesetools #handplane #joinery #hudsonvalley

An old timer once told me you should be able to si

An old timer once told me you should be able to sink a tenon with your hat, and it shouldn’t come apart if you shake and invert it. Snug but tight is the motto here! Sometimes I like them to fit tighter and seat with mallet taps, other times (like when timber framing) an easier fit is generally helpful.
Tighter doesn’t always equal stronger.
.
.
How do you like to fit your joinery?
.
.
.
#wood #woodworker #woodworking #furnituremaker #bois #holz #joinery #mortiseandtenon #satisfying #asmr #handtools

Cutting joinery on the 1950’s Baxter Whitney sli

Cutting joinery on the 1950’s Baxter Whitney sliding table saw. These sliders were called variety or joinery saws - and they are very different than the sliding panel saws popular today.
#wood #woodworking #woodworker #furnituremaker #joinery #satisfying #tablesaw #bois #madera #holz

One of the most useful tools we have added this ye

One of the most useful tools we have added this year, isn’t what you might expect. We have tested it in all conditions, extreme heat, cold, direct sunlight, running a trade show booth for an entire weekend, non-stop high discharge and it even got covered in overspray from the 🎨 sprayer.
It’s never skipped a beat - and has never left us stranded.
.
.
Growatt is having a Black Friday Sale - Up to 40% off! Offer ends on the 27th Nov. (PST.)
Check it out here >> https://bit.ly/466OcRr
2. Hashtags: #GrowattBlackFriday #INFINITY1300

.

If you want perfectly fitting joinery - don’t ju

If you want perfectly fitting joinery - don’t just go slamming that tenon into its mortise. Finesse it and Sneak up on that fit, don’t scare it - but you have my permisch’ to be sneaky.
.
.
.
#wood #woodworker #joinery #bois #handplane #mortiseandtenon #handtools #furnituremaker

Load More... Follow on Instagram

Contact Us

We are in the shop - please leave a message and we will get right back to you!

Contact Info

Hoener Farms
820 Duell Road, Millbrook, NY 12545
845-475-6773
farmerjo@hoenerfarms.com
https://www.hoenerfarms.com

Best Sustainable Furniture Maker

Recent Posts

Très Coffee Table
Bank Bench
English Field Gates
Fire Ebonized Dining Room Table
Custom built-in bookshelves

© [2021] · Hoener Farms.